CONVENIENT USER-FRIENDLY COMMAND BUTTONS

The two buttons of the Flow Meter to the left of the Display are simply to navigate through the Channels (A–P), or optionally through TAG ID's (01–99). The UP arrow cycles forward; and the DOWN arrow cycles in the reverse order.

If in CHANNEL Navigation Mode, the Channels (A–P) will advance with the UP arrow button, displaying its Channel designation (A–P) as well as its 8-character Channel name (the Addresser software can modify the Channel names).

If in TAG ID Navigation Mode, the TAG# as well as the 8-character TAG ID, will advance (from 01 to 99) each time the UP arrow is depressed (or the TAGS reverse when DOWN arrow is pressed).

Once the User has selected the desired ID, the SEL button will be used to Manually log a point (MANUAL LOGGING Mode). Each time the SEL button is pressed, a point is captured and the Display flashes to acknowledge that a data point has been taken. For AUTO LOGGING Mode, hold the SEL button for 3 seconds, and data will automatically be logged every 10 Seconds. To suspend AUTO LOGGING, press any button. The Power button is also used to switch Modes. Each time the Power button is pressed for 1 second, Ultrasonic flow meter as a new Mode appears in the following order: RE-MAP Mode (associates TAGS to Channels); FILE/LOG Mode (output to PC or clear data); TAG ID Mode (displays specific pipe Tag with its associated Channel); and finally back to the CHANNEL Mode (the Factory default). To turn Ultrasonic off, hold Power button for 4 seconds.